Description; Basics - Siemens SINUMERIK 840D sl Programming Manual

Description

1.1

Basics

General information
Measuring cycles are general subroutines designed to solve specific measurement tasks.
They can be adapted to specific problems via parameter settings.
When taking general measurements, a distinction is made between
● Tool measurement and
● Workpiece measurement.
Workpiece measurement
Workpiece measurement, turning example
In workpiece measurement, a probe is moved up to the clamped workpiece in the same way
as a tool and the measured values are acquired. The flexibility of measuring cycles makes it
possible to perform nearly all measurements required on a milling or turning machine.
The result of the workpiece measurement can be optionally used as follows:
● Compensation in the work offset
● Automatic tool offset
● Measurement without offset
Measuring cycles
Programming Manual, 02/2011, 6FC5398-4BP40-0BA0
Workpiece measurement, milling example
1
9