Siemens Sinumerik 840D sl Function Manual page 474

Data Description
8.2 Parameters for SINAMICS S120
p9763 SI password acknowledgment
Acknowledges the new Safety Integrated password. The new password
entered into p9762 must be re- -entered in order to acknowledge. After success-
fully acknowledged, the new Safety Integrated password is set with
p9762=p9763=0.
See also: p9762
Unit: Default value:
- - 0000 hex
r9770[0...3] SI version drive- -integrated safety functions (Control Unit)
Displays the Safety Integrated version for the drive- -integrated safety functions
on the Control Unit.
Index 0: Safety Version (major release)
Index 1: Safety Version (minor release)
Index 2: Safety Version (baselevel or patch)
Index 3 = Safety Version (hotfix)
See also: r9870, r9890
Example:
r9770[0] = 2, r9770[1] = 60, r9770[2] = 1, r9770[3] = 0
- -- -> Safety version V02.60.01.00
Unit: Default value:
- - - -
8-474
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
Minimum value: Maximum value:
0000 hex FFFF FFFF hex
Minimum value: Maximum value:
- - - -
Checksum:
Protection level:
No
3
Data type: Effective:
Unsigned32 immediately
Checksum: Protection level:
No 3
Data type: Effective:
--
Unsigned16
© Siemens AG 2015 All Rights Reserved
10/15