Siemens Sinumerik 840D sl Function Manual page 709

10/15
© Siemens AG 2015 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) - - 10.2015 Edition
The following applies to the "Safe cam track" function:
(each of the result lists 3--7 includes 6 cam results)
Safe cam 1--: Bits 2, 3 in result list 3
Safe cam 2--: Bits 6, 7 in result list 3
Safe cam 3--: Bits 10, 11 in result list 3
Safe cam 4--: Bits 14, 15 in result list 3
Safe cam 5--: Bits 18, 19 in result list 3
Safe cam 6--: Bits 22, 23 in result list 3
Safe cam 7--: Bits 2, 3 in result list 4
Safe cam 8--: Bits 6, 7 in result list 4
Safe cam 9--: Bits 10, 11 in result list 4
Safe cam 10--: Bits 14, 15 in result list 4
Safe cam 11--: Bits 18, 19 in result list 4
Safe cam 12--: Bits 22, 23 in result list 4
Safe cam 13--: Bits 2, 3 in result list 5
Safe cam 14--: Bits 6, 7 in result list 5
Safe cam 15--: Bits 10, 11 in result list 5
Safe cam 16--: Bits 14, 15 in result list 5
Safe cam 17--: Bits 18, 19 in result list 5
Safe cam 18--: Bits 22, 23 in result list 5
Safe cam 19--: Bits 2, 3 in result list 6
Safe cam 20--: Bits 6, 7 in result list 6
Safe cam 21--: Bits 10, 11 in result list 6
Safe cam 22--: Bits 14, 15 in result list 6
Safe cam 23--: Bits 18, 19 in result list 6
Safe cam 24--: Bits 22, 23 in result list 6
Safe cam 25--: Bits 2, 3 in result list 7
Safe cam 26--: Bits 6, 7 in result list 7
Safe cam 27--: Bits 10, 11 in result list 7
Safe cam 28--: Bits 14, 15 in result list 7
Safe cam 29--: Bits 18, 19 in result list 7
Safe cam 30--: Bits 22, 23 in result list 7
Displayed monitoring status (NCK/drive (%3, %4)):
-- OFF = monitoring inactive in this monitoring channel
-- OK = monitoring active in this monitoring channel, limit values not
violated
-- L+ = monitoring active in this monitoring channel, upper limit value
violated
-- L-- = monitoring active in this monitoring channel, lower limit value
violated
10.2NCK safety alarms for Sinumerik 840D sl
Diagnostics
10-709