Siemens SINAMICS S120 Commissioning Manual page 65

Retentively saving data
You can use this function to save volatile Control Unit data to the non-volatile memory
(memory card). After backing up, the data are also kept if the 24 V Control Unit supply has
been switched off. In order to execute this function in the online mode, the following operator
actions are alternatively available:
1. Select the drive unit and call the menu "Target system > Copy RAM to ROM".
2. Select the drive unit and call the shortcut menu "Target device > Copy RAM to ROM".
3. If the drive unit has a gray background, click on the symbol
4. if, after every download into the target device, data is also to be automatically transferred
5. Click the "Download" tab and activate the option "After loading, copy RAM to ROM". Click
Load the project to the PG/PC
You can use this function to load the current Control Unit project to STARTER. This function
can only be activated in the online mode. In order to execute this function in the online mode,
the following operator actions are alternatively available:
1. Select the drive unit and call the shortcut menu "Target device > Load CPU/drive unit into
2. Select the drive unit and call the menu "Target system > Load > Load CPU/drive unit to
3. If the drive unit has a gray background, click on the symbol
Commissioning Manual
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
or
or
or
into the non-volatile memory, call the menu "Tools > Settings...".
"OK" to confirm this setting.
PG/PC...".
or
PG...".
or
PG/PC...".
Commissioning
2.2 STARTER commissioning tool
"Copy RAM to ROM".
"Load CPU/drive unit to
63