2.2.3
Activating online operation: STARTER via PROFIBUS
The programming device (PG/PC), on which the STARTER commissioning tool is activated,
is connected to PROFIBUS using a PROFIBUS adapter.
STARTER via PROFIBUS (example with 2 CU320-2 DP)
Figure 2-4
Making the STARTER settings for PROFIBUS
The following settings are required in the STARTER commissioning tool for communication
via PROFIBUS:
1. Call the menu "Tools > Set PG/PC interface ...".
2. If the interface has still not been installed, click on the "Select" button.
3. In the selection list on the left-hand side, select the module that you want to use as the
4. Click the "Install" button.
Commissioning Manual
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
Connecting the programming device to the target device via PROFIBUS
interface.
The selected module is then listed in the "Installed" list.
Commissioning
2.2 STARTER commissioning tool
67