3.2.2
Trace function
3.2.2.1
Single trace
You can use the trace function to record measured values over a defined period, depending
on trigger conditions. Alternatively, the measured values can also be recorded using
immediate recording.
In the STARTER commissioning tool you can parameterize the trace function by using the
"Trace" parameterizing screen form.
Calling the "Trace" parameterizing screen form
1. In the STARTER commissioning tool, click on the symbol
Figure 3-4
Trace function
Commissioning Manual
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
generator).
The "Trace" parameterizing screen form is then displayed. Example:
Diagnostics
3.2 Diagnostics via STARTER
(device trace-function
277