Siemens SINAMICS S120 Function Manual page 749

PROFIenergy query commands
Query commands
List_Energy_Saving_Modes
Get_Mode
PEM_Status
PEM_Status_with_CTTO
PE_Identify
Query_Version
Get_Measurement_List
Get_Measurement_List_with_object
_number
Get_Measurement_Values
Get_Measurement_Values_with_obj
ect_number
Drive functions
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
11.3 Communication via PROFINET IO
Description
Determines all supported energy-saving modes.
Determines the energy-saving mode.
Determines the current PROFIenergy status.
Determines the current PROFIenergy status, such as the PEM
status and together with the regular transition time to the
operating state.
Determines the supported PROFIenergy commands.
Shows the implemented PROFIenergy profile.
This command returns the measured value IDs that can be
accessed using the "Get_Measurement_Values" command.
This command returns the measured value IDs and the
associated object number that can be accessed using the
"Get_Measurement_Values_with_object_number" command.
The command returns the requested measured value using the
measured value ID:
For power measured values: The command addresses the
•
sum of the measured value over all control drive objects.
For energy measured values: The command returns the
•
sum of the measured value over all control drive objects.
For power factors: This measured value is supported only
•
for a SINAMICS with a control drive object.
This command returns the requested measured values using
the measured value ID and the object number. The object
number corresponds to the drive object ID.
The drive object ID of the Control Unit is used to address the
measured values as with "Get_Measurement_Value".
Communication
749