Topology Example: Drives In U/F Control (Vector Control) - Siemens SINAMICS S120 Function Manual

Basic information about the drive system
13.11 Supported sample topologies
13.11.5

Topology example: Drives in U/f control (vector control)

The following diagram shows the maximum number of controllable vector V/f drives with
additional components. The sampling times of individual system components are:
● Active Line Module: p0115[0] = 250 µs
● Motor Modules: p0115[0] = 500 µs
● Terminal Module/Terminal Board p4099 = 2 ms
Figure 13-26 Topology example of a vector drive line-up in U/f control
882
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
Drive functions