Pioneer PE6000 Series User Manual page 137

PE6000 User Manual
descriptions of P8-19 and P8-20.
Any frequency reaching
P8-30
Any frequency reaching
detection amplitude 1
P8-31
Any frequency reaching
P8-32
Any frequency reaching
detection amplitude 2
P8-33
If the output frequency of the AC drive is within the positive and negative amplitudes of the any
frequency reaching detection value, the corresponding DO becomes ON.
The PE6000 provides two groups of any frequency reaching detection parameters, including
frequency detection value and detection amplitude, as shown in the following figure.
Figure 5-20 Any frequency reaching detection
Zero current detection level
P8-34
Setting Range
Zero current detection delay time
P8-35
Setting Range
detection value 1
Setting Range
Setting Range
detection value 2
Setting Range
Setting Range
Default
0.00 Hz to maximum frequency
Default
0.0%–100.0% (maximum frequency)
Default
0.00 Hz to maximum frequency
Default
0.0%–100.0% (maximum frequency)
Default
0.0%–300.0% (rated motor current)
Default
0.00–600.00s
137
Description of Function Codes
50.00 Hz
0.0%
50.00 Hz
0.0%
5.0%
0.10s