Viewing And Modifying Function Codes - Pioneer PE6000 Series User Manual

Operation, Display and Application Examples
Hz: unit of frequency
A: unit of current
V: unit of voltage
RPM (HZ+A): unit of rotational speed
%( A+V): percentage
3) Data Display
The 5-digit LED display is able to display the set frequency, output frequency, monitoring data
and fault codes.
4) Description of keys on the operation panel
Table 3-1 Description of keys on the operation panel
Key
PRG
ENTER
RUN
STOP/RES
MF.K
QUICK

3.2 Viewing and Modifying Function Codes

The operation panel of the PE6000 adopts three-level menu.
The three-level menu consists of function code group (Level I), function code (Level II), and
function code setting value (level III), as shown in the following figure.
Name
Programming
Confirm
Increment
Decrement
Shift
RUN
Stop/Reset
Multifunction
Menu mode selection
Enter or exit Level I menu.
Enter the menu interfaces level by level, and
confirm the parameter setting.
Increase data or function code
Decrease data or function code
Select the displayed parameters in turn in the
stop or running state, and select the digit to be
modified when modifying parameters.
Start the AC drive in the operation panel
control mode.
Stop the AC drive when it is in the running
state and perform the reset operation when it
is in the fault state. The functions of this key
are restricted in P7-02.
Perform function switchover according to the
setting of F7-01.
Perform switchover between menu modes
according to the setting of PP-03.(One Menu
mode by default)
16
PE6000 User Manual
Function