Pioneer PE6000 Series User Manual page 27

PE6000 User Manual
3.7.1 Frequency Setting by the Main Frequency Source
There are nine setting modes of main frequency sources, digital setting (UP/DOWN
modification, non-retentive at power failure), digital setting (UP/DOWN modification, retentive at
power failure), AI1, AI2, AI3, pulse setting, multi-reference, simple PLC, and communication
setting. You can select one in P0-03.
Figure 3-15 Frequency set by the main frequency source
On extension
board
PD.00~PD.05
Host computer
Communication
configuration
According to the preceding figure, the running frequency of the AC drive can be set by means
of function codes, manual adjustment, analog input, multi-speed terminal, external feedback
signal, internal PID regulator, or the host computer.
Set the corresponding function codes of each frequency setting mode, as shown in the
preceding figure.
Retentive at
power failure
Each frequency
Group PC
Simple PLC
Group PA
H1000 register
Operation, Display and Application Examples
Digital setting
Analog
Analog
Analog
P0-03
Main
Pulse setting
frequency
source X
selection
Multi-speed
Communication
setting
27
Main
frequency
source X
Frequency switchover