Pioneer PE6000 Series User Manual page 161

PE6000 User Manual
Multi-reference can be switched over based on different states of DI terminals. For details, see
the descriptions of group F4.
Function
Parameter Name
Code
Simple PLC running
PC-16
Simple PLC can be either the frequency source or V/F separated voltage source.
When simple PLC is used as the frequency source, whether parameter values of PC-00 to
PC-15 are positive or negative determines the running direction. If the parameter values are
negative, it indicates that the AC drive runs in reverse direction.
Figure 5-31 Simple PLC when used as frequency source.
Running
direction
DO or relay
output
0: Stop after the AC drive runs one cycle
•
The AC drive stops after running one cycle, and will not start up until receiving another
command.
1: Keep final values after the AC drive runs one cycle
•
The AC drive keeps the final running frequency and direction after running one cycle.
2: Repeat after the AC drive runs one cycle
•
The AC drive automatically starts another cycle after running one cycle, and will not stop until
0: Stop after the AC drive runs one cycle
1: Keep final values after the AC drive runs
mode one cycle
2: Repeat after the AC drive runs one cycle
Setting Range
250 ms pulses
161
Description of Function Codes
Time (t)
Default
0