Pioneer PE6000 Series User Manual page 88

Description of Function Codes
To satisfy requirements of different applications, the PE6000 provides two output selections of
0Hz, Yes and No.
Function
Code
Acceleration/Deceleration time
P0-25
The acceleration/deceleration time indicates the time for the AC drive to increase from 0 Hz to
the frequency set in P0-25. If this parameter is set to 1, the acceleration/deceleration time is related
to the set frequency. If the set frequency changes frequently, the motor's acceleration/deceleration
also changes
Function
Code
Base frequency for UP/DOWN
P0-26
modification during running
This parameter is valid only when the frequency source is digital setting.
It is used to set the base frequency to be modified by using keys
UP/DOWN function. If the running frequency and set frequency are different, there will be a large
difference between the AC drive's performance during the acceleration/ deceleration process.
Function
Parameter Name
Code
Binding command
P0-27 source to frequency
Parameter Name
base frequency
Parameter Name
0: No binding
1: Frequency source by digital setting
2: AI1
3: AI2
4: Keyboard potentiometer
5: Pulse setting (DI5)
6: Multi-reference
7: Simple PLC
8: PID
source
9: Communication setting
Ten's digit (Binding terminal command to
Hundred's digit (Binding communication
Setting Range
0: Maximum frequency (P0-10)
1: Set frequency
2: 100 Hz
Setting Range
0: Running frequency
1: Set frequency
Setting Range
Unit's digit (Binding operation panel
command to frequency source)
frequency source)
0–9, same as unit's digit
command to frequency source)
0–9, same as unit's digit)
88
PE6000 User Manual
Default
0
Default
0
and or the terminal
Default
000