Installing The System Board - Dell EMC PowerEdge R940 Installation And Service Manual

Figure 102. Removing system board
Next steps
Install the system board.

Installing the system board

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
1. Unpack the replacement system board assembly.
CAUTION: Do not lift the system board by holding a memory module, processor, or other components.
CAUTION: Take care not to damage the system identification button while placing the system board into the
system.
2. Holding the system board handle and blue release pin, incline the system board and lower the system board into the system.
3. Slide the system board toward the back of the system until the release pin clicks into place.
118 Installing and removing system components
Safety instructions
Before working inside your system
on page 29.
on page 30.