Right Control Panel - Dell EMC PowerEdge R940 Installation And Service Manual

Table 7. iDRAC Quick Sync 2 indicators and descriptions (continued)
iDRAC Quick Sync 2 indicator code
Solid white
Blinks white rapidly
Blinks white slowly
Blinks white five times rapidly and then
turns off
Solid amber
Blinking amber

Right control panel

Figure 7. Right control panel
Table 8. Right control panel
Item Button or port
1 Power button
2 iDRAC Direct port
Condition
Indicates that iDRAC Quick Sync 2 is
ready to communicate. Press the iDRAC
Quick Sync 2 button to turn off.
Indicates data transfer activity.
Indicates that firmware update is in
progress.
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Indicates that the system is in fail-safe
mode.
Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Icon
Corrective action
If the LED fails to turn off, restart the
system. If the problem persists, see the
Getting help
If the indicator continues to blink
indefinitely, see the
If the indicator continues to blink
indefinitely, see the
Check if iDRAC Quick Sync 2
feature is configured to be disabled
by iDRAC. If the problem persists,
see the
more information, see Integrated Dell
Remote Access Controller User's Guide
at
Dell OpenManage Server Administrator
User's Guide at
openmanagemanuals.
Restart the system. If the problem
persists, see the
Restart the system. If the problem
persists, see the
Description
Indicates if the system is powered on or off. Press the power
button to manually power on or off the system.
NOTE: Press the power button to gracefully shut down an
ACPI-compliant operating system.
The iDRAC Direct port is micro USB 2.0-compliant. This port
enables you to access the iDRAC Direct features. For more
section.
Getting help
Getting help
Getting help section. For
www.dell.com/poweredgemanuals
https://www.dell.com/
Getting help
Getting help
PowerEdge R940 overview
section.
section.
or
section.
section.
13