Installing The Cooling Fan - Dell EMC PowerEdge R940 Installation And Service Manual

Figure 30. Removing the cooling fan
Next steps
Install the cooling fan.

Installing the cooling fan

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
WARNING: Do not drop the fan into the fan cage while removing or installing the fan as this may cause damage
to the connectors on the fan tray. Exercise utmost care while removing or installing cooling fans.
Steps
1. Holding the release tabs, insert the cooling fan into the fan cage with the arrow marked on the fan pointing towards the
back of the system.
2. Lower the cooling fan to connect the connector on the fan to the connector on the fan tray.
Safety instructions
Before working inside your system
on page 29.
on page 30.
Installing and removing system components 41