Installing The Air Shroud - Dell EMC PowerEdge R940 Installation And Service Manual

Figure 27. Removing the air shroud — Four processor system
Next steps
Install the air shroud.

Installing the air shroud

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
1. To install the air shroud in a two processor configuration system:
a. Lower the air shroud into the system until it is firmly seated.
When firmly seated, the memory socket numbers marked on the air shroud align with the respective memory sockets on
the system board.
38 Installing and removing system components
Safety instructions
Before working inside your system
on page 29.
on page 30.