Test Equipment; Procedure; Test Menu Utility Softkey; Description - HP 8340B Manual

Chapter
16.
Test Menu Utility Softkey
16.0 Description
The
test
menu Utility softkey provides
you with the capability of changing the synthesizer's
defined option configuration (option configuration defined by the Cal Constants) from your
computer, displaying data from previously run tests, or displaying the test status
of previously
tested instruments- The feature which allows
you to change the synthesizer's
defined option
configuration should be used after an option has been added
to
or
deleted from the
synthe¬
sizer.
16.1 Test Equipment
None Required
16.2 Procedure
1.
After the Utility softkey provided
In
the test menu has been selected, the program will
display the following softkey choices:
Chg Option
-
Allows you to change
the
synthesizer's
defined option configuration
After selecting
this
softkey,
Input
each of the synthesizer's
3 digit
option strings (one at
a
time) and press ENTER after each entry
Press ENTER when finished
inputting the options and then check the
option
list.
Upon completion of the option entry, the program will
automatically update
the calibration
constants in
the synthesizer and
the data file on the data disc to reflect the option configuration you
entered
Dsp Data
-
Allows you to display or print the test data from previously run tests
The data displayed will
be for the
instrument whose
serial
number
is
currently
in
the computer's
memory and for
the type of testing you
selected while in the
TEST SELECTION
menu (I.e
,
either the Opera¬
tion Verification or the Attenuator Calibration). After selecting this
softkey, the program will
display the test menu and
allow you to
output
all
the test data (ALL DATA softkey), output the data
for one
test
(SELECT
softkey), or return to the
UTILITIES
menu
(EXIT
softkey) The
SELECT
softkey outputs the
data for the test
at
which
the cursor points. Use the keyboards UP or DOWN arrow keys or the
rotary control knob on the
keyboard to
position the cursor.
Prt
Status
-
Allows you to display
or
print the test status for the synthesizer
whose serial number is
currently
in
the
computer's memory. The
status displayed
will
be for the type of testing
you
selected while in
the
TEST SELECTION menu
(i.e., either the
Operation Verification or
the Attenuator Calibration menu).
Exit
-
Returns you to the test menu-
Select the desired softkey and respond
to the prompts provided by the program.
HP 8340A/B and HP 8341A/B
Test Menu Utility Softkey