HP 8340B Manual page 262

5-10.
YO DELAY COMPENSATION, A54 (Cont'd)
24. Press the
DUT's [RF]
key to
turn
RF power on. Adjust A54R30 CGN to set the peak of the
signal at
the center line of the oscilloscope screen.
25. On the DUT, press [RECALL], then enter [1]. Repeat
steps
7 through 24
until
no further adjust¬
ment of A54R30 (CGN)
and
A54R32 (COFF)
is
necessary.
26. Disconnect
all of the test equipment and reconnect the cables.
BEGINNING
OF MARKER
s
Figure 5-31.
Z-Axis Marker Waveform
Figure 5-32. Amplitude Marker Waveform
HP 8340B/41B
Adjustments