HP 8340B Manual page 175

HP-IB ADDRESSES OF THE TEST EQUIPMENT
The
test software drives specific HP-IB
test equipment. Table
3-2 lists
the
HP-IB test equipment
compatible
with the software. No substitution of test equipment, with the exception of those
listed
in
Table 3-2, may be made. The procedure for
modification is described in
CHANGING THE HP-IB
ADDRESS ASSIGNMENTS.
Also shown
in
Table 3-2 are the current
HP-IB
address assignments for the test equipment.
If
you
wish to use
a
different address than shown, you must modify the software (see
CHANGING THE
HP-IB ADDRESS ASSIGNMENTS.) If
you use the
equipment and addresses
listed in the table, no
modification of the
software
is
required.
Table 3-2.
HP-IB
Address Settings for the Test Equipment
Model Number
HP 2225A or 2673A
HP 5343A
HP 3585A
HP 436A
HP5316A
HP8340A/Bor8341A/B
HP 8340A/B
Description
Printer
Frequency Counter
Spectrum Analyzer
Power Meter
Universal Counter
Device Under Test
Local Oscillator
HP-IB Address
01
02
11
13
16
19
20
CHANGING THE HP-IB ADDRESS ASSIGNMENTS
The subprogram
Asgn_test_equip
(in
the test program JANITOR, see Figure 3-2), contains the test
equipment HP-IB address assignments. To
change
the assigned HP-IB, perform the procedure
pro¬
vided
in Performing the Modification.
JANITOR
is located on disc
1 of HP part
number 08340-10009,
and on disc
2 of HP part number 08340-10011 and
08340-10012.
How to Configure the Software
Attenuator Calibration and Operation Verification
Test Software