4-12.
PULSE MODULATION RISE AND FALL TIME TEST (Cont'd)
Procedure
1.
Connect equipment as shown
in
Figure 4-13.
Connect the mixer directly to the
local
oscillator RF
output to obtain maximum LO
drive to the mixer. Connect the
BNC
tee directly
to
the HP
8340B/41B PULSE
IN
connector. Allow
a
one hour
warm
up time.
HP
8340B/41B
SYNTHESIZED
SWEEPER
LOCAL
OSCILLATOR
Figure 4-13.
Pulse
Modulation
Rise and
Fall Time Test Setup
HP 8340B/41B
Performance Tests