Test Equipment - HP 8340B Manual

OPERATING SYSTEM
The
test software requires HP Basic
3.0
and the HP Basic
3.0
binary extensions listed below, or HP
Basic 4.0
and the
HP
Basic 4.0 binary extensions
listed below. If you
are
using
one
of the series
300
computers recommended above,
you must use HP Basic 4.0. Also, use of
a
disc drive
other than the
recommended
disc drives
may
require additional binary extensions.
Name
Description
GRAPH
Graphics
GRAPHX
Graphics Extensions
10
I/O
MAT
Matrix Statements
KBD
Keyboard Extensions
CLOCK
Clock
MS
Mass Storage
ERR
Error Messages
CS80 CS80
Disc Driver
HPIB
HP-IB Interface Driver
NOTE: When HP
Basic
is
loaded into your technical computer's memory,
the binary extensions must
also be loaded.
The
binary extensions can either be loaded by
using the
"LOAD BIN" command
or by
configuring your
HP Basic operating system
to include the binary
extensions
(this
is
the most conve¬
nient way).
For
more
information regarding configuring
an
operating
system, refer to your HP Basic
user's guide under the heading CONFIGURING BASIC SYSTEMS.
TEST EQUIPMENT
Table
2-1
provides
a
comprehensive
listing of
the test equipment
and accessories required to run
the
test software.
Local Oscillator1^
..................................
HP 8340A/B Option
H01
or HP 8340A/B
Option
001
Spectrum Analyzer1
...........................................
HP 3585A
Frequency Counters
...................................
HP 5343A
Option 011
Power Meter
..........................................
HP 436A
Option 022
Power Sensor
.................................................
HP 8481A
Power Sensor
.................................................
HP 8485A
Universal Counter1
.............................................
HP 5316A
Amplifier1
....................................................
HP 8447F
Step Attenuator (calibrated
at
1 MHz)'
..............................
HP 355D
Printer
.......................................................
HP 2673A
or HP 2225A
Attenuator (10 dB)1
....................................
HP
8493C Option 010
Attenuator (20 dB)
....................................
HP 8493C Option 020
Mixer1
................................................
HP P/N 0955-0307
Low Pass
Filter1
........................................
HP P/N 9135-0260
2-2 Required Test Equipment
Attenuator Calibration and Operation Verification Test Software