Finishing Modes - Canon imagePRESS C7000VP Reference Manual

Finishing Modes

The Finisher-AB1 and Saddle Finisher-AB2 are equipped with the
following finishing modes.
CAUTION
• Do not place anything other than output paper in the trays of the
finisher, as doing so may damage the trays.
• Do not place anything under the trays of the finisher, as doing so may
damage the trays.
NOTE
If the Finishing mode is set, the output trays move downward as the stack of
paper that is output increases in quantity and thickness. Once an output
tray has reached its stacking limit, subsequent prints are automatically
delivered to the next available tray. If all of the available trays have reached
their stacking limits, printing stops temporarily. Remove all of the output
paper from the trays. The trays move upward, and printing resumes.
■ Collate Mode
Prints are automatically collated into sets arranged in page order.
The collated print sets can be shifted by pressing [Offset].
■ Group Mode
All prints of the same original page are grouped together. The
grouped print sets can be shifted by pressing [Offset].
■ Offset Mode
The print output is shifted alternately to the front and back of the
tray, in a vertical (portrait) orientation, or a horizontal (landscape)
orientation, depending on the orientation of your originals. For
example, if you place A4R originals, the paper is output and shifted
in the horizontal direction. If you place A4 originals, the paper is
output and shifted in the vertical direction.
NOTE
If you press [Offset] when either the Collate or Group mode is set, each set
of prints is shifted about 30 mm before it is delivered to the output tray.
■ Staple Mode
Prints are automatically collated into sets arranged in page order
and stapled. If the Copy function is selected, prints are stapled in
the following places:
Finisher-AB1/Saddle Finisher-AB2/Punch Unit-U1/W1/X1/Document Insertion Unit-C1 A3-48