Adjusting The Position Of Punch Holes Of A Custom Paper Type - Canon imagePRESS C7000VP Reference Manual

3
Press [Change] next to <Saddle Stitch Position Adjust>.
4
Press [▼] or [▲] to adjust the saddle stitch position ➞ [OK].
If you want the saddle stitch position to shift right toward the printing
surface, increase the setting value.
If you want the saddle stitch position to shift left toward the printing
surface, decrease the setting value.
5
Press [Done].
Adjusting the Position of Punch Holes of a
Custom Paper Type
Depending on the paper type, the positions of the punch holes may be
slightly different on each piece of paper. In this case, you can make
fine adjustments to the positions of the punch holes to compensate
this error. For example, if the positions of the punch holes on multiple
paper types in the Sheet Insertion mode are not exactly the same, you
can use this mode to make fine adjustments.
IMPORTANT
• [Hole Punch Position Adjust] is displayed only if the settings are made
available by your local authorized Canon dealer. Even if [Hole Punch
Position Adjust] is displayed, do not allow anyone to change the settings
except for the system manager. For more information on changing the
settings, contact your local authorized Canon dealer.
• Only user-registered paper types can be edited.
NOTE
You cannot change the detailed information of paper being used for
copying/printing jobs.
Registering/Editing Custom Paper Types A6-131