Tone Settings
You can set whether to sound audible tones. The following tones
sound at the following times:
•
Entry Tone:
When pressing keys on the control panel or keys
on the touch panel display
•
Invalid Entry Tone:
When an invalid key on the control panel or touch
panel display is pressed, or when the maximum
number of characters allowed is exceeded
•
Restock Supplies Tone: When the toner cartridge needs to be replaced
•
Error Tone:
When a malfunction occurs (e.g., paper jam or
operational error)
•
Job Done Tone:
After a job completes (e.g., outputting or stapling is
complete)
•
Forgot Original Tone:
When placing originals in the feeder while an
original remains on the platen glass, or vice versa
1
➞ [Common Settings] ➞ [Audible Tones].
Press
2
Select [On] or [Off] for the desired tones ➞ press [OK].
Display the Remaining Paper Message
You can set to display the message indicating that the remaining
paper loaded in a paper deck is low.
1
➞ [Common Settings] ➞ [Display Remaining
Press
Paper Message].
2
Select [On] or [Off] ➞ press [OK].
Specifying Common Settings
A4-22