Clearing Staple Jams
If a staple jam occurs, follow the procedure described below to remove the
jammed staples.
Finisher-AB1/Saddle Finisher-AB2 (Optional)
If a staple jam occurs in the stapler unit of the optional Finisher-AB1 or
Saddle Finisher-AB2, a screen similar to the one shown below appears on
the touch panel display. Check the location of the staple jam, and follow the
procedure described below, and the procedure that appears on the touch
panel display, to remove any jammed staples.
IMPORTANT
Take care when handling the optional equipment that is attached to the
machine. When an optional unit's cover is opened to replace a staple
cartridge, discard punch waste, or clear paper or staple jams, prints may
still be output if other optional units are operating normally, and are not
involved in the paper or staple jam removal procedure.
1
Open the front cover of the finisher.
2
Remove the paper waiting to be stapled from the delivery
tray.
Clearing Staple Jams
A8-101