Setting The Gamma Value For Remote Scans - Canon imagePRESS C7000VP Reference Manual

2
Select [High Ratio], [Normal], or [Low Ratio] ➞ press [OK].
Details of each item are shown below.
[High Ratio]: A small amount of memory is used for scanning the document,
but the images have a lower image quality.
[Normal]: The amount of memory used for scanning the document and
the quality of the images are moderate. The compression ratio
is between the High Ratio and Low Ratio settings.
[Low Ratio]: A large amount of memory is used for scanning the document,
but the images have a higher image quality.

Setting the Gamma Value for Remote Scans

You can set the gamma value that is used for scanning colour
documents into your computer through the Network Scan function.
Select a gamma value that is most suited to your computer settings so
that you can print the document from your computer with the most
optimal density.
NOTE
• [Gamma Value for Remote Scans] appears only if the optional Color UFR II/
PCL/PS Printer Kit or imagePRESS Server is available for use.
• For more information on the Network Scan function, see the Network
ScanGear Guide.
1
➞ [Common Settings] ➞ [Gamma Value for
Press
Remote Scans].
2
Select the gamma value ([Gamma 1.0], [Gamma 1.4],
[Gamma 1.8], or [Gamma 2.2]) ➞ press [OK].
Specifying Common Settings A4-48