Exposure Recalibration When Scanning - Canon imagePRESS C7000VP Reference Manual

Hide thumbs Also See for imagePRESS C7000VP:

Table of Contents

Select the colour to adjust ➞ press [-] or [+] to adjust the

density level of each of the density areas.

Exposure Recalibration When Scanning

When the optional Feeder (DADF-R1) is attached, scanning a curled

original that is placed on the platen glass may result in density

unevenness on the left and right edges. This is because the original is

not placed flat on the platen glass. This may be improved by adjusting

the density level (up to approximately 20 mm) of the left and right

edges of the paper.

(A3 or 11" x 17")

Density Unevenness

[Exposure Recalibration when Scanning] is displayed only when the

settings are made available by your local authorized Canon dealer. Even if

[Exposure Recalibration when Scanning] is displayed, do not allow anyone

to change the settings except for the system manager. For more information

on changing the settings, contact your local authorized Canon dealer.

Device Management Settings

Imagepress c6000vp Imagepress c6000