Restricting the Type of Information That Is
Updated
You can restrict the type of device information that is received and
updated.
IMPORTANT
While receiving and updating device information, the screen indicating that
the settings are being updated is displayed. Operations on this machine
cannot be performed until the update completes.
1
➞ [System Settings] ➞ [Device Information
Press
Delivery Settings] ➞ [Receive Restriction for Each
Function] under <Receiving Settings>.
2
Select [On] or [Off] next to the functions you want to
restrict ➞ press [Done].
Details of each item are shown below.
[On]: The machine is restricted, and does not update the selected device
information.
[Off]: The machine is not restricted, and updates the device information.
NOTE
• Before setting <Add. Functions Settings Value>, <Dept. ID>, or <Address
Book> to 'Off', it is necessary to set a default key in Network Settings (from
the Additional Functions screen). (See Chapter 3, "Using a TCP/IP
Network," in the Network Guide.)
• Changes are only effective after you restart the machine (the main power is
turned OFF, and then back ON). For instructions on restarting (turning the
main power OFF, and then back ON) the machine, see "Main Power and
Control Panel Power," on p. A1-7.
Specifying Device Information Delivery Settings
A6-49