Test Print Paper
The test print paper used when you adjust the location of the image is
described below. The following shows the test print paper which
printed on A3 paper.
Feeding Direction
Lead
Edge
(A3)
Register
Left
Marks
Edge (A1)
The side printed "1" on it is the front side. The side with nothing
printed on it is the back side.
The arrow printed in the centre of the test print paper indicates the
feeding direction.
Left
Edge (A2)
■ Register Mark
• You can adjust the image location of the lead edge toward the feeding
direction by aligning it with the "A3" register mark. (If you are printing on
an 11" x 17" paper, align the image location of the lead edge with the
"L3" register mark.)
• You can adjust the image location of the left edge toward the feeding
direction by aligning it with the "A1" register mark. (If you are printing on
an 11" x 17" paper, align the image location of the left edge with the "L1"
register mark.)
• You can check whether the paper was transferred askew toward the
feeding direction, by comparing the "A1" and "A2" register marks. (If you
are printing on an 11" x 17" paper, compare the "L1" and "L2" register
marks.)
Registering/Editing Custom Paper Types
A6-104