Changing The Paper Size For The Pod Deck - Canon imagePRESS C7000VP Reference Manual

CAUTION
When closing the paper deck, be careful not to get your fingers
caught, as this may result in personal injury.
IMPORTANT
You will not be able to make copies or print if you load paper that exceeds
the loading limit, or if the paper deck is not completely pushed into the
machine. Always check that the paper decks are in place, and that the
paper does not exceed the loading limit.
NOTE
If paper runs out during copying or printing, load a new paper stack, and
follow the instructions on the touch panel display. The machine
automatically restarts, and produces the remaining copies or prints.

Changing the Paper Size for the POD Deck

This section explains how to change the paper size for the optional POD
deck. It is necessary to register the paper size for the paper deck in
Register Paper in Common Settings (from the Additional Functions
screen) before loading the paper. (See "Identifying the Paper Size/Type
in a Paper Source," on p. A4-26.)
1
Register the desired paper size for the POD deck in
Register Paper in Common Settings (from the Additional
Functions screen).
For instructions on registering the paper size for the paper deck, see
"Identifying the Paper Size/Type in a Paper Source," on p. A4-26.
POD Deck-A1/Secondary POD Deck-A1 (Optional) A7-17