Suspending Job If Multiple Sheet Feed Is
Detected
When multiple sheets of paper are fed at the same time from the
paper source, paper jams may occur. This mode enables you to set
whether to suspend a print job when multiple sheet feed is detected.
IMPORTANT
The machine may not resume a job automatically since paper may remain
in the main unit, depending on the paper size or the operation mode.
1
➞ [Common Settings] ➞ [Suspend Job if Multiple
Press
Sheet Feed is Detected].
2
Select [On] or [Off] ➞ press [OK].
Details of each item are shown below.
[On]: If the multiple sheet feed is detected, the machine stops a job and
displays a message. Check the paper and output result, and resume
printing according to the message.
[Off]: If the multiple sheet feed is detected, the machine outputs the
unnecessary paper to the escape tray and resumes a job
automatically.
Initial Hold Screen Display
This mode enables you to set the Hold screen that is displayed after
turning ON the machine and auto clear.
1
➞ [Common Settings] ➞ [Default Screen for Hold].
Press
2
Select [Single List Display] or [Double List Display] ➞ press
[OK].
Specifying Common Settings
A4-51