Entering The Department Id And Password - Canon imagePRESS C7000VP Reference Manual

Entering the Department ID and Password

If Department ID Management has been set, the Department ID and password
must be entered before using this machine.
NOTE
• For instructions on setting the Department ID and password, see
"Department ID Management," on p. A6-5.
• If you are using the optional Card Reader-C1, the message <You must
insert a control card.> appears on the touch panel display. Insert the control
card into the card slot. (See "Card Reader-C1," on p. A3-54.)
• The use of some functions may be restricted, and a screen asking you to
enter your Department ID and password or insert your control card may
appear while you are using the machine. Follow the instructions on the
touch panel display to continue using the selected function.
• If you are using a MEAP application to manage user authentication, and
SDL or SSO is set as the login service, the following procedure is not
necessary. (See "Using a Login Service," on p. A2-25.)
1
Use - (numeric keys) to enter your Department ID and
password.
❑ Press [Dept. ID] ➞ enter your Department ID.
❑ Press [Password] ➞ enter the password.
If no password has been set, proceed to step 2.
The numbers that you enter for the password are displayed as
asterisks (*******).
NOTE
• If you make a mistake when entering the Department ID or password, press
➞ enter the correct values.
• Check with your system manager if you do not know your department ID or
password.

Entering the Department ID and Password

A2-23