Clean the Original Scanning Area Prompt
You can use the Cleaning Display for the Original Scanning Area
mode to prompt you to clean the scanning area when the machine
detects streaks or stains. If the feeder is not clean, the machine will
scan and print dust and grime on the output. The Clean the Original
Scanning Area Prompt appears when originals are placed in the
feeder. For instructions on cleaning the feeder's scanning area, see
"Platen Glass/Original Feeding Belt/Underside of the Platen Cover,"
on p. A7-59.
NOTE
This mode is available only if the optional Color Image Reader-H1 or
Feeder (DADF-R1) is attached.
1
➞ [Common Settings] ➞ [Cleaning Display for the
Press
Original Scanning Area].
2
Select [On] or [Off] ➞ press [OK].
Data Compression Ratio for Remote Scans
You can set the compression ratio for network scanning. A high
compression ratio reduces the amount of memory used for scanning
the document, but results in a lower image quality. On the contrary,
a low compression ratio increases the amount of memory used for
scanning the document, but results in a higher image quality.
NOTE
• [Data Compression Ratio for Remote Scans] appears only if the optional
Color UFR II/PCL/PS Printer Kit or imagePRESS Server is available for
use.
• For more information on the Network Scan function, see the Network
ScanGear Guide.
1
➞ [Common Settings] ➞ [Data Compression Ratio
Press
for Remote Scans].
Specifying Common Settings
A4-47