Adjusting The Skew Correction Level Of The Fed Paper - Canon imagePRESS C7000VP Reference Manual

Details of each item are shown below.
[On]: The paper length is accurately measured for two-sided printing. The
measured value is then calculated to adjust the position of the image
on the second side.
[Off]: The paper length is not measured for two-sided printing. The value set
for the Lead Edge Alignment Adjustment mode is used directly to
adjust the image position.
NOTE
If you switch between [On] and [Off], check the image position set for the
back side of the Lead Edge Alignment Adjustment mode again.
6
Press [Done].
Adjusting the Skew Correction Level of the fed
paper
If the printed image is slanted on the particular paper (such as Thin
Paper) only, this feature may enable you to adjust the transferring
position of the paper.
The skew correction roller is located in the feeding unit of the marking
engine. It adjusts the registered position of fed paper by pushing the
paper diagonally against the wall inside the feeding unit. If the setting
of skew correction level is incorrect, the printed image is slanted.
1
➞ [System Settings] ➞ [Paper Type Management
Press
Settings].
2
Select the paper type that you want to edit from the list ➞
press [Details/Edit].
NOTE
• The meanings of the icons that appear on the left side of each custom
paper type are described below:
: Paper that is registered from [Duplicate] or [Paper Database] with
default settings.
: Paper that is registered from [Duplicate] or [Paper Database] with
changed settings.
• You can select a paper type to display from the paper type selection
drop-down list.
- [All]: Displays all paper types.
- [Standard]: Displays only standard paper types.
- [Custom]: Displays only custom paper types.
• You can sort the paper type list by registration date ([Regist.]), name
([Name]), or basis weight ([Weight]) from the Sort List by drop-down list.
Registering/Editing Custom Paper Types A6-118