Fine Adjusting The Zoom Ratio Of The Image - Canon imagePRESS C7000VP Reference Manual

IMPORTANT
When you open the [Image Location Adjustment] screen again after you
close that screen by pressing [OK], the values on screen are returned to [0].
Nevertheless the adjusted value is effective. If you repeat steps, read off the
value of register marks from new test print and input the new value.
13
Press [Done].

Fine Adjusting the Zoom Ratio of the Image

Depending on the paper type, the heat generated by the fixing
assembly may cause the paper to expand or shrink slightly. In this
case, images may also be enlarged or reduced accordingly. This
feature enables you to set the zoom ratio of the image for each piece
of paper, or enlarge the reduced image to match the zoom ratio of the
image on the 2nd side of the paper. You can adjust the zoom ratio of
the image either by entering the enlargement/reduction ratio, or by
entering the value of the test print paper you measured manually.
1
➞ [System Settings] ➞ [Paper Type Management
Press
Settings].
2
Select the paper type that you want to edit from the list ➞
press [Details/Edit].
NOTE
• The meanings of the icons that appear on the left side of each custom
paper type are described below:
: Paper that is registered from [Duplicate] or [Paper Database] with
default settings.
: Paper that is registered from [Duplicate] or [Paper Database] with
changed settings.
• You can select a paper type to display from the paper type selection
drop-down list.
- [All]: Displays all paper types.
- [Standard]: Displays only standard paper types.
- [Custom]: Displays only custom paper types.
• You can sort the paper type list by registration date ([Regist.]), name
([Name]), or basis weight ([Weight]) from the Sort List by drop-down list.
Registering/Editing Custom Paper Types A6-113