Distinguishing LTRR and STMT Originals
You can designate the way the machine handles LTRR and STMT
originals that are placed on the platen glass.
1
➞ [Common Settings] ➞ [LTRR/STMT Original
Press
Selection].
2
Select [Distinguish Manually], [Use LTRR Format], or [Use
STMT Format] ➞ press [OK].
If you select [Distinguish Manually], a screen enabling you to select
the original size appears when scanning.
If you select [Use LTRR Format], the machine detects the original as
LTRR.
If you select [Use STMT Format], the machine detects the original as
STMT.
Output Tray Designation
You can designate the machine's output trays to be used for specific
functions.
The output trays are indicated by Tray A, B, and C.
Options Attached
Finisher-AB1 or Saddle Finisher-AB2
Finisher-AB1 or Saddle Finisher-AB2,
and High Capacity Stacker-C1
Finisher-AB1/Saddle Finisher-AB2
and two High Capacity Stacker units
Tray A/B/C
Specifying Common Settings
A4-31