Document Sizes; Orientation - Canon imagePRESS C7000VP Reference Manual

Document Sizes

The size of the original is automatically detected, and the document is
scanned.
The machine cannot always detect the size of the original if it is a
nonstandard paper size, such as a book. In this case, specify the size
at which you want to scan the original. (See Chapter 3, "Basic
Scanning Features," in the Sending Guide.)

Orientation

You can place an original either vertically or horizontally. Always align
the top edge of your original with the back edge of the platen glass (by
the arrow in the top left corner).
Place the
original
face down.
Vertical Placement
NOTE
• If the top edge of the original is not aligned with the back edge of the platen
glass (by the arrow in the top left corner), your original may not be scanned
correctly, depending on the copy mode that you have set.
• Originals of A4, B5, and A5 sizes can be placed either vertically or
horizontally. However, the scanning speed for horizontally placed originals
is somewhat slower than vertically placed originals. Place originals
horizontally when scanning with a Preset Zoom, such as when enlarging an
A4 original onto A3 paper.
• Horizontally placed A4, B5, and A5 originals are referred to as A4R, B5R,
and A5R.
• A3 and B4 originals must be placed horizontally.
Place the original face down.
Horizontal Placement
Color Image Reader-H1 A3-13