Orientation; Placing Originals In The Feeder - Canon imagePRESS C7000VP Reference Manual

Orientation

You can place an original either vertically or horizontally. Always align
the top edge of your original with the back edge of the slide guide.
Feeder
SADF
Tray
Place the
Place the original
original
face up.
face down.
Vertical Placement
NOTE
• If the top edge of the original is not aligned with the back edge of the slide
guide, your original may not be scanned correctly, depending on the copy
mode that you have set.
• Originals of the A4 and B5 sizes can be placed either vertically or
horizontally. However, the scanning speed for horizontally placed originals
is somewhat slower than vertically placed originals. Place originals
horizontally when scanning with a Preset Zoom, such as when enlarging an
A4 origianl onto A3 paper.
• Horizontally placed A4 and B5 originals are referred to as A4R and B5R.
• A3 and B4 originals must be placed horizontally. A5 must be placed
vertically.
Feeder
SADF
Tray
Place the
Place the original original
face up. face down.
Horizontal Placement

Placing Originals in the Feeder

You should use the feeder when you want to copy several originals at
the same time. Place the originals into the feeder and press
machine automatically feeds the originals to the platen glass and
scans them. Two-sided originals can also be automatically turned
over and scanned as two-sided documents.
• Weight:
- One-sided scanning: 50 to 216 g/m
- Two-sided scanning: 50 to 216 g/m
• Size: A3, B4, A4, A4R, B5, B5R, or A5
(A5 originals cannot be placed horizontally. (A5R))
• Tray Capacity: up to 100 sheets (80 g/m
IMPORTANT
• Thin originals may become creased, if used in a high temperature or high
humidity environment.
• Do not place the following types of originals into the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon backed paper or other originals which may not feed smoothly
- Transparencies and other highly transparent originals
• If the same original is fed through the feeder repeatedly, the original may
fold or become creased, and make feeding impossible. Limit repeated
feeding to a maximum of 30 times (this number varies, depending on the
type and quality of the original).
• If the feeder rollers are dirty from scanning originals written in pencil,
perform the feeder cleaning procedure. (See "Automatic Feeder Cleaning,"
on p. A7-60.)
• Always smooth out any folds in your originals before placing them into the
feeder.
. The
2
2 2
(A3, B4, A4R, B5R: 50 to 200 g/m
2
)
Feeder (DADF-R1) A3-19
)