Changing The Language Shown On The Touch Panel Display - Canon imagePRESS C7000VP Reference Manual

Changing the Language Shown on the Touch
Panel Display
You can select the language displayed on the touch panel display.
NOTE
• If Language Switch is set to 'On', some characters are restricted and cannot
be entered. To be able to enter all characters, set Language Switch to 'Off'.
• Even if Language Switch is set to 'On', there are some languages that
cannot be displayed.
1
➞ [Common Settings] ➞ [Language Switch].
Press
2
Press [On] ➞ select the desired language ➞ press [OK].
If you do not want to change the display language, press [Off].
If you press [Display Shortcut Key], [
[System Monitor] on the Basic Features screen. [
to the Language Switch screen.
] will be displayed next to
] is a shortcut key
IMPORTANT
• Some messages may not be displayed properly in the language that you
just selected. In this case, restart the machine (turn the machine OFF, and
then back ON). For instructions on restarting (turning the main power OFF,
and then back ON) the machine, see "Main Power and Control Panel
Power," on p. A1-7.
• If SSO is set as the login service, and there is a difference between the
language set on the machine and the one set in Active Directory, the
sender's full name will not be displayed in e-mail messages sent to the
recipient.
Specifying Common Settings A4-43