• The user information registered for SDL or the Local Device Authentication
system of SSO, and the registered Department ID and password set for
Department ID Management must match. If the registered Department ID
and password have been changed because information was updated or
changed by the Device Information Delivery Settings mode, make sure that
you change/update the user information registered for SDL or the Local
Device Authentication system of SSO accordingly. For instructions on
registering SDL or SSO user information, see the MEAP SMS Administrator
Guide.
• If SDL or SSO is set as the login service, the Limit Functions mode will not
be available.
NOTE
• The maximum number of digits that you can store for the Department ID
and password is seven. If you enter fewer than seven digits for either
setting, the machine stores them with leading zeros.
- Example: If <321> is entered, <0000321> is stored.
• Other than using Department ID Management, this machine enables you to
manage user information using SDL or SSO.
Registering the Department ID, Password, and
Page Limit
1
➞ [System Settings] ➞ [Dept. ID Management].
Press
2
Press [On] ➞ [Register Dept. ID/Password].
If you do not want to store a Department ID, password, or page limit
restriction, proceed to step 10.
3
Press [Register].
Department ID Management
A6-6