Double Staple Space Adjustment
If the optional Finisher-AB1 or Saddle Finisher-AB2 is attached to the
machine and you want to double staple your copies, you can adjust
the space between the two staples.
You can adjust the double staple space from 120 mm to 150 mm.
NOTE
If the width of the paper is less than 257 mm, the Double Staple Space
Adjustment mode is automatically set to 120 mm.
1
➞ [Adjustment/Cleaning] ➞ [Double Staple Space
Press
Adjustment].
2
Press [-] or [+] to adjust the double staple space ➞ press
[OK].
NOTE
• To enter values in inches, press [Inch].
• When entering values in millimetres, you can also use
keys), and
to clear your entries.
• If you enter a value outside the setting range, a message prompting you to
enter an appropriate value appears on the screen.
• For instructions on entering values in inches, see "Values in Inches,"
on p. A2-21.
-
(numeric
Adjusting the Machine
A4-58