Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 964

MANUAL TRANSMISSION -
Sensor, Switch and Relay <Vehicles with ACD or
vehicles with ACD and AYC>
INSPECTION
ELECTRIC PUMP RELAY CONTINUITY CHECK
1. Using a jumper wire, connect a battery (+) to terminal
13 of the electric pump relay and battery ( - ) to terminal
1.
2. While intermittently disconnecting the jumper wire at the
battery side, check for continuity between terminals 4
and 5 of the electric pump relay.
Jumper wire
Connected
Disconnected
ACD MODE SWITCH CONTINUITY CHECK
ACD mode switch
terminal
No.1 - No.2
No.3 - No.4
Continuity between No.4 - No.5
Continuity
No continuity
ACD mode switch Continuity
ON Continuity
OFF No continuity
-
Continuity
22A-57