Vehicles With Mechanical Lsd - Mitsubishi Electric Lancer Evolution-VII Workshop Manual

MB991460
Washer
MB990767
225±25 N·m
REAR AXLE -
Drive Shaft
(4) To prevent entry of foreign matter into the
differential carrier, use the special tool as a cover.
<Vehicles with mechanical LSD (RH)>
INSTALLATION SERVICE POINTS
"AA DRIVE SHAFT INSTALLATION
Caution
When installing the drive shaft to the differential carrier,
be careful that the spline part of the drive shaft does not
damage the oil seal.
"BA DRIVE SHAFT NUT INSTALLATION
1. Assemble the drive shaft washer in the illustrated direction.
2. Tighten the drive shaft nut fully with special tools.
Caution
Do not apply pressure to wheel bearing by the vehicle
weight to avoid possible damage to wheel bearing
before tightening drive shaft nut fully.
3. If the pin hole does not align with another, tighten the
drive shaft nut (less than 250 N
hole then bend the split pin to fit in.
27B-31
m) and find the nearest
·