Evaporator And Air Thermo Sensor - Mitsubishi Electric Lancer Evolution-VII Workshop Manual

55-34
HEATER, AIR CONDITIONER AND VENTILATION

EVAPORATOR AND AIR THERMO SENSOR

REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operations
Refrigerant Draining and Refilling (Refer to P.55-16, 19.)
D
- Pipe coupling
O-ring
1, 2
A/C compressor oil:
SUN PAG 56
Disassembly steps
D Glove box (Refer to GROUP 52A –
Instrument Panel.)
D Engine-ECU (Refer to GROUP 14.)
1. Suction pipe connection
AA"
2. Liquid pipe B connection
AA"
3. Expansion valve
AA"
-
Evaporator and Air Thermo Sensor
8
4
7
AB" "AA 7. Evaporator
REMOVAL SERVICE POINTS
AA" WHEN DISCONNECTING THE SUCTION PIPE,
LIQUID PIPE B, AND THE EXPANSION VALVE
To prevent the entry of dust or other foreign bodies, plug
the dismantled hose and the nipples of the expansion valves.
Caution
As the compressor oil and receiver are highly moisture
absorbent, use a non-porous material to plug the hose
and nipples.
9
2
12 ± 2 N·m
1
3
6
5
4. Expansion valve adapter
5. Joint duct
6. Evaporator cover
8. Air thermo sensor clip
9. Air thermo sensor