Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 30

Front pillar
Center pillar
WELDED PANEL REPLACEMENT -
NOTE ON REPAIR WORK
INSTALLATION
1. Release the side outer panel from the new parts and
2. When attaching the side sill outer reinforcement, apply
3. When attaching the side outer panel, apply body sealant
Reference
Depending on the damaged range, it is advisable to replace
the side outer panel and side sill outer reinforcement parts.
Caution
Cut the side sill outer reinforcement 50 mm away from
the cut area of the side outer panel.
Side Sill
remove unnecessary front pillar reinforcement lower,
front pillar reinforcement lower extension, and center
pillar reinforcement
reinforcement.
adhesive to the areas indicated in the illustration.
: Adhesive
Adhe-
Type
sive sive
Epoxyayresin
adhesive
to the areas indicated in the illustration.
: Body sealant
:Cuttable range
from the side sill
BRAND
3M DP-460, 3M DP-420 or
equivalent
C-13
outer