Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 874

REAR AXLE -
<Differential support member>
Bush
Differential
support
member
Steel block
Hollow
<Differential support arm>
Removal
MB991439
Bush
Steel block
Steel block
Differential
support arm
Hollow
Differential Carrier <Vehicles with AYC>
BUSHING REPLACEMENT
1. Remove and press fit the bush with special tool.
2. Press fit th bush so that the hollow of the bush is on
3. Press fill the bush until the surface of the outer sleeve
MB990641
Press-fitting
the position shown as the illustration.
of the bush,differential support member or differential
support arm contact.
27B-57