Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 900

PROPELLER SHAFT
REMOVAL AND INSTALLATION
2
1
1
30 ± 4 N·m
Removal steps
1. Insulator
2. Spacer
AA" "AA 3. Propeller shaft assembly
Joint boot
Rag
Joint assembly
PROPELLER SHAFT - Propeller Shaft
2
1
1
3
REMOVAL SERVICE POINT
AA" PROPELLER SHAFT ASSEMBLY REMOVAL
1. Make mating marks on the differential companion flange
2. By filling rag in the boot and align the propeller shaft,
Center propeller
shaft
A10C0017
Gear Oil: Hypoid gear oil SAE 75W-90 or
75W-85W or 80W conforming to API GL-4
30 ± 4 N·m
32 ± 2 N·m
and flange yoke, and then remove the front propeller
shaft assembly.
remove the propeller shaft assembly
Caution
If the joint part is bent, the joint boot is danger of
damage by folding joint boot.
25-3