Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 413

55-36
HEATER, AIR CONDITIONER AND VENTILATION
COMPRESSOR
REMOVAL AND INSTALLATION
Before Removal
Refrigerant Draining (Refer to P.55-19.)
- Pipe coupling
1, 2
O ring
A/C compressor oil:
SUN PAG 56
Removal steps
1. Flexible suction hose connection
AA"
2. Flexible discharge hose connection
AA"
3. Drive belt
AB"
5
3
REMOVAL SERVICE POINTS
AA" DISCONNECTION OF FLEXIBLE SUCTION HOSE
AND FLEXIBLE DISCHARGE HOSE
To prevent the entry of dust or other foreign bodies, plug
the dismantled hoses and compressor nipples.
Caution
As the compressor oil and receiver are highly moisture
absorbent, use a non-porous material to plug the hose
and nipples.
-
Compressor
After Removal
Refrigerant Replenishing (Refer to P.55-16.)
D
Drive Belt Tension Check (Refer to GROUP
D
11A – Engine Adjustment.)
AC" "AA 4. Compressor
5. Compressor bracket
4
2
1
25 ± 4
N·m