Mitsubishi Electric Lancer Evolution-VII Workshop Manual page 370

HOW TO READ THE WIRING DIAGRAMS -
Item No. Connector/Earthing
Connector 1
and terminal
marking
Male
terminal
-
Connector 2 Device
symbol
marking
Intermediate connector
Spare connector, check connector
Male connector
Female
connec-
tor
Female
terminal
Markings for Connector Earthing
Symbol Contents
The male and female terminals are
Male terminal
indicated as shown. The connector
with male terminal(s) is called as
male connector and indicated by
double connector contour linens,
while the connector with female while the connector with female
terminal(s) is called as female
Male connector
connector and indicated by single
connector contour line.
Female terminal
Female connector
The symbol indicates the vehicle
connector as viewed from the
illustrated direction. At the connec-
tion with a device, the connector
symbol on the device side is
shown, and for an intermediate
connector, a male connector sym-
bol is shown. For spare connectors bol is shown For spare connectors
and check connectors, no device is
connected, and so the harness-
side connector symbol is shown for
these connectors. The details for
the diagnosis connector differ from
the above description. For details,
refer to the "MUT-II operation
instructions . instructions".
A-7